Skip to main content
Home Articles Printing Guide

Printing Guide

Updated 10/29/2020
How to print labels, order printed labels, and troubleshoot printing issues in Maestro Label Designer

We want to make sure what you've created on-screen matches what comes out of your printer. Read up on our pre-printing tips, printing instructions, and troubleshooting advice (if needed) below.

Pre-Printing Tips

  • Download and open your Maestro Label Designer files in Adobe Reader whenever possible. Built-in PDF readers (especially Safari's or Preview) may scale your design to fit the specifications of the "normal template." This can cause your labels to be misaligned.

  • Print a test sheet on plain printer paper before loading your labels. Take your draft print and position it behind a label sheet. Hold them both up to the light and check for any alignment issues.

How to Print Your Design

  1. Launch Maestro Label Designer and sign in.

  2. With your label design open, hover over "Print" in the blue navigation bar.

  3. Click "Print Now" to print the file on your personal work or home printer. We recommend downloading and opening it in a dedicated PDF viewer like Adobe Reader.

    Maestro Label Designer Print Menu

Common Problems & Fixes

Alignment Issues

If your design isn't properly aligning with the margins of your label, try the following fixes:

  • Open your downloaded label file in your PDF viewer and hit print. Before printing, check that the "Actual Size" option is selected and that page scaling is set to "none." You can also set the "Custom Scale" option to 100%. If you changed one of these settings, load your label paper into the printer and reprint.

  • Run our Alignment Wizard. Hover over "Print" in the blue navigation bar and click "Alignment Wizard," then "Create Alignment Page." Load a blank sheet of printer paper and print the document that opens. Return to Maestro Label Designer to complete a short series of questions in the Alignment Wizard. Load your label paper into the printer and reprint.

  • Manually calculate your misalignment measurements and adjust the margins of your document. Measure how far off your design is from the side and top border of your label on your printed sheet. Open the "Page Setup" menu from within the "Print" menu in the blue navigation bar. For designs shifted up or to the left, subtract your measurement from the appropriate row. For designs offset to the right or down, add your measurement. Reprint.

Text & Image Outlines

If you see lines running through your image or squares around parts of your design, your PDF reader is recognising your design elements as in image. By changing the text, fonts, and/or images in your design to an image, the program can skip processing the image and instead print your design as you intended. Here's how:

Open your downloaded label file in your PDF viewer and hit print. Click on the advanced print settings option. Look for the "Print as Image" button – you want this box to be checked. Save your changes, load your label paper into the printer, and reprint.




For personalised assistance, please call our customer service team at 0203 051 9664.


Share What You Learned