Skip to main content
Home Articles Should You Use Milk to Stick Your Labels?

Should You Use Milk to Stick Your Labels?

Updated 11/09/2020
Milk making contact with wine bottle and label

If you make your own beer or wine at home, a custom designed label is the next step in establishing your brand identity. We've noticed that lately, some more crafty brewers use a little-known technique involving milk. Yes, milk. Why, you might ask? For brewers that reuse their bottles, there's little residue leftover with this process.

Interestingly, the protein in milk has long been used as a powerful bonding agent. It was actually the basis behind Elmer's® Glue in its early years (thus, the cow mascot). We decided to give this method a try and see if it actually works well. Below is our process and the long-awaited results.

The Milk Method: 5 Easy Steps

After printing your intended design on traditional printer paper, follow these steps to make it adhesive.

Step 1

Milk Method Step 1

Pour a small amount of milk into a dish or cup. You'll want to use whole (or 2%) milk as it contains the components needed for bonding.

Step 2

Milk Method Step 2

Carefully cut your label design out with scissors.

Step 3

Milk Method Step 3

Lightly apply the milk across the entire back of the label. It's important to use a small amount of milk only, adding too much can make the paper wrinkle and smell awful. It's milk after all!

Editor's Note: If you think dipping the whole bottle in milk will be easier than only the back side of your design, think again. Doing it this way would make the entire bottle sticky!

Step 4

Milk Method Step 4

Using steady hands, place the label around the seam of the bottle or use the seam as a straight edge.

Step 5

Milk Method Step 5

Smooth down your newly applied label with a paper towel to remove any bubbles and wipe off excess milk.

Conclusion

Milk and paper vs label comparison Comparison of paper stuck with milk (left) versus an adhesive label (right).

Much to our surprise, using milk to stick paper to your beer bottles does work. And as you can probably tell from the image above, there isn't much of a visual difference between the two. Having said that, it might not be your best option. The time wasted during this precise and labor-intensive process will really begin to add up when you're labelling a large amount of bottles. Not to mention the accumulated cost of all of the milk you'll be using! And, have you considered how the milk might spoil and produce a rotten odor or unstick if left in the heat / out of a fridge? Lastly, what happens when the label gets wet from condensation, ice in a cooler, or moisture?




If you're drawn to the milk method for its ease of removal, you have other options. Online Labels carries removable labels. They adhere when you need them to yet still remove cleanly when you don't. We also offer weatherproof labels if you're looking for a more permanent, waterproof solution.

Whichever material you're after, browse our selection of beer bottle labels. These are perfect for personalising your product and can be used with your home or office printer.

If you're dealing with leftover adhesive from other products, check out our article, How to Remove Labels, for more details and processes.


Share What You Learned